Plastimo Bilge Pump 925

Stock Status:   Out Of Stock
Product Condition:   New
Send to a friend
  • Plastimo
  • Capacity, as per ISO 15083 standard
  •  45 strokes per minute
  • 10 kPA depression
  • 40.5 litres / minute
  • Hose dia: Ø 25 mm (1'')

Optimum safety. No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated handle.In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.Simple installation and maintenance Installing the pump is extremely simple : all done from the cockpit. The diaphragm can be removed within seconds, with 3 screws only, no need to take down the whole pump. This facilitates the cleaning of the pump body (remove small stones and other possible objects clogged in the pump) and enables the replacement of the diaphragm if necessary.Construction from materials impervious to UV-rays, resistant to shocks and weathering.CompactThe Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Plastimo Bilge Pump 925 and 1038: with Telescopic Handle and By-Pass - diagram

New. Dispay Model . Shop soiled. Never used. Some Discolouration of white plasticon edges, otherwise good condition. 
Instruction booklet included.

UK Delivery £5.50.